Floor levelling is necessary for every building to bring about a proper finish and uniformity. It helps to create equal spacing between the tiles along with a fine level. It creates a surface free of tile lippage. With the help of tile leveling system, shifting during any installation process has become easy. Advanced tools are used for the positioning of all kinds of tiles like porcelain, ceramic, granite, stone, marble, etc. These tiles can be used on both floor and walls.
It is suitable for both indoor and outdoor purposes. It is re-usable and can be removed easily without applying any extra force. The plastics used in the process of manufacturing system levelling is of the best quality and lab tested. They are flexible and are easy to use. The process of floor and wall levelling is easy. First the floor needs to be prepared where the tiling will be done, then the tile glue needs to be applied carefully. Following this the tile has to be placed methodically. The tile levelling clips must be placed under the tile approximately 5cm from the corner. After this the wedge needs to be slid into the hole on the clip then with pliers the clips must be tightened with moderate pressure until the upper edges of the tiles get aligned in a parallel line.
After twelve hours of placing and clipping the tile levels, using a rubber hammer the clip needs to be removed from the direction of the joint sealing. Tile leveling system is very easy to use and also comes at a very reasonable rate.